Philips widescreen flat TV 50PF9956 127 cm 50" plasma Progressive Scan - Manual (Page 14)

10
Press the MENU button on the remote control to summon the main menu.
Note: Dependent on the input signal, one or more menu items may not be selectable.
Picture Sound Features Channels
Auto picture
Contrast
Brightness
Color
Sharpness
Color temperature
Digital processing
Dynamic contrast
DNR
Color enhancement
Tint
Picture format
TV
Note: Sharpness, Digital natural motion,
Dynamic Contrast, DNR, Color
enhancement, Tint and Picture format
are not available for HD sources.
Press the INFO button on the
remote control to get
information about the selected
menu item.
& Press the cursor right to select Picture .
é Select the menu items in the Picture menu with the cursor
up/down.
“ Adjust the settings with the cursor left/right or enter the
list of submenu items with the cursor right. Select a
submenu item with the cursor up/down.
Note: To remove the menu background before adjusting the
picture settings, see Select TV Settings, General, p. 6.
Auto picture
Select Auto picture to display a list of predefined picture
settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of
picture in the picture menu.
Note: this Philips Flat TV has been set at the factory to look best
in bright store environments which typically use florescent lighting.
As your home will likely not be as well lit as a store, we
recommend that you cycle through the various Auto Picture
modes to find the one that best suits your own viewing conditions.
Most consumers will find that
Natural is the correct choice.
Digital processing
• Standard : line doubling eliminates line flicker.
• Dig. natural motion : For everyday viewing, Dig. natural
motion is the most ideal setting, as it fully processes the
image to make every single pixel the best it can be,
improving contrast, sharpness, picture depth, and color
reproduction and brilliance from every source, including
High Definition. For the most optimum motion
reproduction of all source materials, select the
Movie Plus
setting. Standard Mode is recommended only for very
noisy or poorly mastered sources or for those who find the
smoothness of Digital natural motion (which eliminates
jutter in the picture) unsettling.
Dynamic contrast
Automatically makes the contrast in the darker and the
brighter picture areas more noticeable as the image on the
screen changes.
Normally, select
Medium . It may be preferred to select
Minimum , Maximum or Off .
& Press the cursor right to enter the list.
é Select one of the settings with the cursor up/down.
“ Press the cursor left to return to the picture menu.
Picture menu
TV menu