Philips S9321-88 - Manual (Page 20)

1 The shaving unit symbol lights up continuously, the arrows flash
white and you hear a beep when you switch off the shaver.
2 Pull the shaving head holder off the bottom part of the shaving unit.
3 Place the retaining ring holder on the retaining ring (1), turn it
anticlockwise (2) and lift it off the shaving head (3).
Remove the retaining ring from the retaining ring holder and repeat this
process for the other retaining rings.
4 Remove the shavings heads from the shaving head holder and throw
them away.
5 Place new shaving heads in the holder.
Note: Make sure the projections of the shaving heads fit exactly into the
recesses.
ENGLISH
20