Sound, Tiling, Sound 5.2.3. tiling – Philips Signage Solutions V-Line Display BDL4280VL 42" Edge LED Backlight Full HD 700cd-m² User Manual

Page 32

BDL4280VL

Advanced
Access advanced settings such as gamma, tint, video contrast and so on.

• {Gamma}: Adjust the non-linear setting for picture luminance

and contrast.

• {Tint}: Change the colour balance.
• {Custom tint}: Customise colour balance setting. Only available

if {Tint}  {Custom} is chosen.

• {Video contrast}: Adjust video contrast.
• {Brightness}: Adjust screen brightness.
• {Hue}: Adjust screen hue.

Game or computer
When viewing content from a connected game console, choose {Game}

to apply game settings. When a computer is connected through HDMI,

choose {Computer}.
Make sure that {Format and edges}  {Picture format}  {Unscaled}

is selected so as to view maximum detail.
Format and edges

• {Picture format}: Change the picture format.

See page 17 for the descriptions about

Picture format

5.2.2. Sound

Sound style
Restore style
Bass
Treble
Balance
Surround mode
Audio out
Advanced

Picture
Sound
Tiling
General settings

Sound style
Access predefined sound settings.
Restore style
Restore the last-selected predefined sound setting.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Surround mode
Enhance your audio experience.
Audio out
Adjust audio output volume.

Advanced
Access advanced settings to enhance your audio experience.

• {Auto volume leveling}: Enable the reduction of sudden volume

changes.

• {Speaker settings}: Turn on or off the internal speakers.
• {Clear sound}: Enhance sound quality.
• {Audio out format}: Choose the type of audio output through

the digital audio output connector. (HDMI only)

• {Audio out delay}: Automatically sync the image on this display

to the audio from a connected home theatre.

• {Audio out offset}: Adjust the setting for audio output delay.

Available if {Audio out delay} is switched on.

5.2.3. Tiling

Enable
H monitors
V monitors
Position
Frame comp.

Picture
Sound
Tiling
General settings

With this function you can create a single large-screen matrix (video

wall) that consists of up to 100 sets of this display (up to 10-sets on the

vertical and 10-sets on the horizontal sides).
Enable
Choose to {On} or {Off} the Tiling function. If {On}, the display will

apply the settings in {H monitors}, {V monitors}, {Position}, and

{Frame comp.}.
H monitors
Adjust displays on the horizontal side.
V monitors
Adjust displays on the vertical side.
Position
Adjust the position of this display in the screen matrix.
Example: 2 x 2 screen matrix (4 displays)

H monitors = 2 displays

V monitors = 2 displays

H monitors

V monitors

Position