Philips AJL700-37B - Manual (Page 19)

19
English
Radio
Autostore: automatic programming
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
● Press and hold AUTO PROG /RADIO
PROG until AUtO appears.
➜ Available stations are programmed (20FM
and 10 AM).
➜ After all stations are stored, the first
autostore preset station automatically plays.
To listen to a preset station
●
Press PRESET - / CH.DOWN, PRESET +
/ CH.UP until the desired preset station is
displayed (or on the remote control 3, 4 ).
Tuning to radio stations
1
Press POWER to on, then press SOURCE
once or more to select RADIO mode.(or on the
remote control, B
B B B B and RADIO/BAND).
➜Display: The waveband, radio station
frequency and if programmed, a preset number
are shown.
2
Press BAND once or more to select your
waveband: FM or AM (or RADIO/BAND on
the remote control)
3
Press and hold TUNING/CLOCK -, + until
the frequency in the display starts running.
➜ The radio automatically tunes to a station of
sufficient reception. Display shows Srch during
automatic tuning.
4
Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press TUNING/
CLOCK -, + briefly and repeatedly until optimal
reception is found.
Storing preset radio stations
You can store up to 30 preset radio stations in
the memory (20 FM and 10AM).
Manual programming
1
Tune to your desired radio station (see “Tuning
to radio stations”).
2
Press AUTO PROG/ RADIO PROG to
activate programming. (or PROG on the
remote control).
➜ Display shows: current radio frequency and
PROG flashes.
3
Press PRESET - / CH.DOWN, PRESET + /
CH.UP to select a preset number. (on the
remote control, 3 , 4)
4
Press AUTO PROG/ RADIO PROG to
confirm.
➜ Display: PROG disappears.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
– You can erase a preset station by storing
another frequency in its place.
DVD
AV
ERASE/WRITE
SHUFFLE
CLOCKSET CLOCKSET PICTURE
VOL