Philips CD1811G-NL - Manual (Page 25)

24
The handset displays a confirmation »
request.
5
Press MENU/OK to confirm.
The default announcement is restored »
Incoming messages (ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator flashes on the answering
machine and the handset displays a notification
message.
Note
If you pick up the phone when the caller leaves •
a message, the recording stops and you can
talk to the caller directly.
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
To start/Stop listening, press • .
To adjust the volume, press • / .
To play the previous message/Replay the •
current message, press .
To play the next message, press • .
To delete the current message, press • .
Note
No deleted messages can be recovered. •
4
Select [RECORD NEW], then press
MENU/OK to confirm.
5
Start recording close to the microphone
after the beep.
6
Press MENU/OK to stop recording or
the recording stops after 3 minutes.
You can listen to the newly recorded »
announcement on the handset.
Note
Ensure that you speak close to the microphone •
when you record an announcement.
Listen to the announcement
1
Press MENU/OK.
2
Select [ANSW MACHINE] >
[ANNOUNCEMENT], then press
MENU/OK to confirm.
3
Select [ANSWER ONLY] or [RECORD
ALSO], then press MENU/OK to
confirm.
4
Select [PLAY], then press MENU/OK to
confirm.
You can listen to the current »
announcement.
Note
You can no longer listen to the announcement •
when you pick up an incoming call.
Restore the default announcement
1
Press MENU/OK.
2
Select [ANSW MACHINE] >
[ANNOUNCEMENT], then press
MENU/OK to confirm.
3
Select [RECORD ALSO]or [ANSWER
ONLY], then press MENU/OK to
confirm.
4
Select [USE DEFAULT], then press
MENU/OK to confirm.
EN