Brother DCP 8080DN - Manual (Page 12)

12
Macintosh
® USB
For USB Interface Users
(Mac OS
®
X 10.3.9 or greater)
11
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
® is ON. You must
be logged on with Administrator rights.
12
Connect the USB cable
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
on the machine marked with the symbol.
Then connect the cable to your computer.
13
Install MFL-Pro Suite
a
Put the supplied CD-ROM into your CD-ROM
drive.
b
Double-click Start Here OSX to install.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
IMPORTANT
Make sure a USB Flash memory device is not
inserted into the machine.
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh ® .
Note
Please see the Software User’s Guide on the
CD-ROM if you want to install the PS driver.
(Brother’s BR-Script Driver)