Bosch WFD50818 - Manual (Page 34)

32
Installation Instructions
Transport e.g. when moving
Before transporting the washing machine:
Turn off the water tap,
Drain any residual washing solution (refer to Page 21),
Release the water pressure in the supply hose(refre to
Page 21),
Disconnect the washing machine from the mains,
Dismantle the supply and drainage hose,
Install the transport bolts.
Having transported the appliance and ensured proper ins-
tallation and connection, allow the Spin programme to
run through before starting the first wash programme.
Preparing and inserting the transport bolts
Remove the covers C.
Remove the back panel D (see Page 28), preparing
the transit bolt.
Insert and tighten the bolts.
,, , ,