Bosch WFD50818 - Manual (Page 31)

29
Installation Instructions
mc
m
ax.100
mc
m
ax.100
mc
m
ax.100
mc
m
ax.100
140cm
~~
100cm
~~
110cm
~~
150cm
~~
110cm
~~
150cm
~~
m6
c
m
ax.
0
m6
c
m
ax.
0
m6
c
m
ax.
0
m6
c
m
ax.
0
Left-hand connection
Right-hand connection
Hose and cable lengths
Water connection
Water supply
For the water connection a standard cold-water line with a
minimum water pressure of 0.1MPa is required (with tap full
ON, at least 8 litres of water must flow out in one minute). If
the water pressure exceeds 1MPa, a pressure reducing valve
must be added.
Never connect the machine to the mixer tap of a pressure-
less hot-water heater.
Caution! Connections are under full water pressure,
check for leaks with tap turned fully ON.
The filters at the free end of the inlet hose and at the back
of machine should only be removed for cleaning purposes.
To avoid water damage, the tap must be turned OFF after
using the machine.