Bosch WFD50818 - Manual (Page 32)

30
Installation Instructions
G 1/2
The plastic nuts on the hose connections must only be
tightened by hand.
For tight connection between washing machine and water
source, you can:
1. Call Customer Service before you install the machine,
get the plastic connector freely. It may connect tightly the
water inlet pipe and your water tap.
2. Or you may purchase the specific water tap from custo-
mer service. It is designed by factory. It may be better co-
nnected with machine than your water tap.
Note: The water tap is not free.
Caution:
Do not disassemble the water inlet hose frequently, the
untight connection will lead to leakage. We suggest that
you use a water inlet hose specially for the washing
machine.
If you need lengthen the water inlet hose together with the
machine, please contact local ASS center/station or leader
to buy additional lengthening hose.
Additional lengthening water inlet hose is not free.
Plastic connector
CS code 424387
Water tap
CS code 184611