Brother NC-7100W - Manual (Page 6)

5
To communicate with the un-configured
NC-7100w change your wireless PC settings
to:
Communication mode: Ad-hoc
(channel 11)
Network name (SSID): SETUP
(case sensitive)
Encryption: None
Please refer to your wireless card
manufacturer instructions for changing the
wireless settings. And then go to Step 3
Configuring the Print Server.
If you are using Windows ® XP or Mac OS ®
X 10.1 to 10.3 and you are using its built in
Wireless Ethernet capabilities, use the
following steps for each Operating
System.
1
Click Start and then Control Panel.
2
Click the Network Connections icon.
3
Select and right click Wireless
Network Connection. Click View
Available Wireless Networks.
4
You can see the Brother wireless print
server in the Available wireless
networks box. Select SETUP and
check the Allow me to connect...
check box. Click the Connect button.
For Windows ® 98/Me/2000,
Windows NT ® 4.0 Users
Continue to Step 3
For Windows
®
XP Users