BT 1250 Classic - Manual (Page 9)

9
On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073
Press OK then 4, this will delete all
numbers in the redial list.
The display will return to the idle
state.
4
GHI
C OK
Press the REDIAL button. This will
take you to the most recent number.
Use the UP or DOWN button to scroll
to the number you require.
Press the GREEN PHONE button to
dial the number.
▲
▼
Redial
Redial
Redial list
To delete all numbers shown in
the redial list
During a call, press the C button.
C will now flash to show it is in
operation.
Press the C button again to resume
your call.
When on a call you can talk to someone in the
same room, without your caller hearing.
C OK
C OK
Secrecy
To switch secrecy on/off
Note
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
Please note that this product does not have
autotalk standby. To end a call you must
press the
RED PHONE button, you cannot
just replace the handset on the base station.
You can adjust the volume during a
call.
Press the UP button to increase the
volume.
Press the DOWN button to decrease
the volume.
The display shows the current volume
level.
To adjust the earpiece volume
▲
▼