BT 1250 Classic - Manual (Page 12)

12
On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073
Keypad beeps
You can set your handset to beep when you
press a button on the keypad.
Handset settings
Press the OK button.
Press the 5 button.
Use the UP and DOWN buttons for
volume control. - - - indicates the
volume is DISABLED, 0 the volume is
set to LOW, 00 the volume is set to
MEDIUM and 000 the volume is set
to HIGH.
Press OK to confirm the setting.
▲
▼
C OK
C OK
Keypad beeps and volume
Press the INTERCOM button.
Press the OK button.
Press the 1 button twice. The date is
displayed.
Press the UP and DOWN buttons to
alternate between the date and the
time.
Press the OK button the time is
displayed.
Press the C button three times to
return to idle.
C OK
C OK
C OK
Intercom
To view the date and time
Press the INTERCOM button.
Press the REDIAL button. The most
recently received number will be
displayed.
To scroll backwards through the calls
list towards the older calls in the list
press the DOWN button.
To scroll forwards through the calls
list towards the most recent calls
press the UP button.
If the UP and DOWN buttons are
pressed when at the end of the list,
the handset will go back to idle.
When the number you wish to call is
displayed press the GREEN PHONE
button.
The number will be automatically
dialled.
Press the C button to return to idle.
Intercom
Redial
▼
▲
To view the Calls list
5
JKL
1
1
C OK
▲
▼
The Calls list contains the telephone numbers
of your last 20 callers. If you receive more than
one call from the same telephone number then
it will only appear once in the list.
If a call is received when the calls list is full,
then the oldest entry will be deleted
automatically.
If no number is received for a call then no
entry will appear in the calls list.
Calls list