BT 1250 Classic - Manual (Page 17)

17
On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073
It is possible to adjust the time
available for a caller to leave a message.
The options are 30 seconds, 2 minutes,
4 minutes and unlimited message
length. The answer machine has a total
recording time of up to 6 minutes.
Press the INTERCOM button.
Press the OK button.
Press the 4 button.
Press the 3 button.
Use the UP or DOWN button to scroll
to the required message length:
1 = 30 seconds, 2 = 2 minutes,
3 = 4 minutes, 4 = unlimited length.
Press OK to confirm.
To adjust the time allowed for
recording incoming messages
To switch the answering machine
on from the base
After recording a new outgoing
message the machine will
automatically switch itself on.
At the base:
To switch on answer and record mode
press the ANSWER button until it is
illuminated green.
Note that you must have recorded an
answer and record outgoing message.
To switch on answer only mode press
the ANSWER button until it flashes
green. Note that you must have
recorded an answer only outgoing
message.
An
swer
An
swer
Intercom
4
GHI
3
DEF
C OK
C OK
▲
▼
Press the INTERCOM button.
For Answer and record mode:
Press the 7 button twice.
Or
For Answer only mode:
Press the 7 button twice quickly.
Press the 3 button twice.
After switching on the answering
machine the appropriate outgoing
message will be played in the earpiece.
Intercom
7
PQRS
7
PQRS
7
PQRS
7
PQRS
3
DEF
3
DEF
To switch the answering machine
on from the handset
Note: Timesaver
If you call from another telephone and it
rings 4 times, there are no new messages.
If the call is answered after 2 rings there are
new messages to listen to.