BT 1250 Classic User Manual

Page 28

Press the

INTERCOM button.

Press the

OK button. F1 will appear on

the screen.

Press the

2 button.

Press the

4 button.

Press the

1 button.

The access code is displayed.

Press the

OK button.

Enter or correct the switchboard
external line access code, e.g.

You can enter codes up to 8 digits in
length.

Press

OK to store.

Press the

C button three times to exit.

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

To set the external line access code

Note

For the external line access code to be dialled
for external calls only, it is important that all
external numbers stored in your handset
directory must contain more digits than the
number of digits required to make an internal
call to other extensions on your switchboard.
This is most likely to occur when you have
local external numbers stored in the handset
directory without the area code. To overcome
potential problems ensure that all numbers
are stored complete with area code.

Press the

INTERCOM button.

Press the

OK button. F1 will appear on

the display.

Press the

2 button.

Press the

4 button.

Press the

3 button.

Use the

UP or DOWN button to select

0 to de-activate, or 1 to activate.

Press

OK to store.

Press the

C button three times to exit.

To activate and de-activate the
external line access code

Intercom

ABC

GHI

Intercom

ABC

GHI

DEF

Press the

INTERCOM button.

Press the

OK button. F1 will appear on

the screen.

Press

2. Press 4. Press 2.

The number of digits is displayed.

Press the

OK button.

Enter or correct the number of digits
you dial to make internal calls to
other extensions on your switchboard.

Press the

C button three times to exit.

Intercom

To set the number of digits

ABC

GHI

ABC