Belkin F8E841-BLK - Manual (Page 6)

2
2. Hardware Installation
2.1 Hardware Installation
Your mouse connects to either a PS/2 mouse port or a
Universal Serial Bus (USB) port . To check, look at the
back of your computer for the port that is designated for your
mouse. Some PCs will have the word MOUSE marked next to
the PS/2 connector. If you are still unsure, please refer to your
hardware manual.
For USB mouse port installation, simply remove the PS/2-USB
adapter from the end of the connector before plugging the
mouse into the computer.
PS/2 Installation
a. Make sure that the computer is turned off.
b. Locate the PS/2 mouse port on the back of your computer.
c. Plug your mouse into the appropriate port suggested
above. Check the box in which your mouse was shipped to
verify the ports supported.
d. Turn your computer on. At this point, your mouse will work
with the built-in Microsoft ® Operating System. To use the
extra features of your middle button, you must install the
included software.