Aironet Lan Adapter - Manual (Page 67)

Installing the Software
3-27
Table 3.12 - PC Card Keywords
Keywords Value Description
PORTBASE 0 – 0xFFFF Optional – specifies the starting
address for a block of 64 consecu-
tive 16-bit I/O ports. Make sure the
block of I/O addresses does not
overlap the address of another
device in the machine. This can be
used to override a card service
assignment. If card services are not
used, this will default to 0x140.
PORT Only valid in NET.CFG file (same as
PORTBASE).
INT 2-15 Optional – specifies the hardware
interrupt the PC Card will use. The
Interrupt must be unique (i.e. not
used by another device in the
machine). This can be used to over-
ride a card service assignment. If
card services are not used, this will
default to 11.
IRQ Same as INT.
SOCKET 0-7 Optional – If card services are used,
this keyword is ignored. If card ser-
vices are not used, this is the PC
Card socket the PC Card is inserted
into (default is 0).
MEMORY 0xC000 –
0xDF00 Optional – If card services are used,
this keyword is ignored. If card ser-
vices are not used, this is a block of
memory the driver will use to view
the PC Card CIS (default is
0xD000). In the NET.CFG file the
parameter is D0000, not 0xD000.
MEM Same as MEMORY.