Philips SENSEO® Kaffeepadmaschine - Manual (Page 22)

5 Put a bowl with a capacity of at least 1.5 litres under the spout to
collect the descaling mixture.
6 Press the on/off button 3 to switch on the machine.
, The machine is ready for descaling when the light ring around the
on/off button lights up continuously.
7 Press the 1-cup button q/f and the 2-cup button qq briefly at the
same time to start the descaling cycle.
Never interrupt the descaling cycle. If you interrupt the descaling cycle,
see chapter Troubleshooting for further instructions.
, The CALC light and the light ring around the on/off button start to
flash slowly to indicate that the descaling cycle has started.
, The descaling cycle takes approx. 35 min. During this cycle, hot water
comes out of the coffee spout at intervals because the machine
pauses several times to let the descaler mixture act.
, When all the water in the water reservoir has been used up, the
descaling cycle is finished. The light ring around the on/off button
starts to flash rapidly to indicate that the water reservoir is empty.
2 rinsing cycle
1 Empty the bowl and place it back under the spout.
EnglisH
22