Philips SENSEO® Kaffeepadmaschine - Manual (Page 14)

2 Press the button indicating the number of cups of SENSEO ® coffee
you want to brew.
- Press the 1-cup button q/f once for one cup of black coffee.
- Press the 1-cup button q/f twice within 2 seconds for a cup of
cappuccino.
Note: Within these 2 seconds you can switch back and forth between one cup
of black coffee and one cup of cappuccino.
- Press the 2-cup button qq for two cups of black coffee.
, The SENSEO ® coffee machine starts brewing and automatically
supplies the correct amount of water for black coffee or water and
milk for cappuccino.
Do not remove the water reservoir during a brewing cycle, as this
causes the machine to draw in air. When this happens, the next cup is
only partly filled.
Do not remove the milk container during a brewing cycle.
3 Remove the coffee pod or pods after use by lifting the pod holder
out of the machine and emptying it.
Be careful when you do this, as there may still be some water/coffee on the
coffee pod or pods.
interrupting the brewing process
1 If you want to interrupt the brewing process, press the on/off button
3 .
Note: If you switch the machine back on after having interrupted the brewing
process, the machine does not complete the interrupted brewing cycle.
switching off
1 After use, press the on/off button 3 to switch off the machine.
Note: If you do not switch off the machine, it switches off automatically after
30 minutes.
EnglisH
14