Philips SENSEO® Kaffeepadmaschine - Manual (Page 11)

switching on the machine
1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
, The light ring around the on/off button flashes slowly while the
water is heating up. Heating up takes approx. 90 seconds.
, The coffee machine is ready for use when the light ring around the
on/off button lights up continuously.
, If the light ring around the on/off button flashes rapidly, the water
reservoir does not contain enough water for brewing coffee.
Placing a pod holder
1 Move the lid lever upwards to release the lid.
2 Open the lid.
3 Place the appropriate pod holder in the machine.
Note: You can only brew 2 cups at the same time if you brew black coffee.
- Use the 1-cup pod holder if you want to make cappuccino or one cup
of SENSEO ® black coffee,
- Use the 2-cup pod holder if you want to make two cups of SENSEO ®
black coffee.
Placing one or two pods
Never put normal ground coffee or use torn pods in the SENSEO ®
machine, as this causes it to become blocked.
1 Place the SENSEO ® coffee pod or pods properly in the centre of the
pod holder, with the convex side pointing downwards.
EnglisH 11