Philips SENSEO® Kaffeepadmaschine - Manual (Page 15)

cleaning the milk container unit
For a reliable performance of the milk container unit and consistently good
frothing results, it is very important that you clean the milk container unit
regularly and thoroughly.
1 If you do not plan to froth milk again straightaway, rinse the milk
container within 30 minutes after use.
2 After the last use of the day, clean all parts of the milk container
unit thoroughly.
For proper cleaning, follow the procedure described below.
Note: If you are unable to obtain high-quality frothed milk, the milk container
unit is probably dirty.
rinsing after every use
1 Pull the milk container lever upwards with your finger to release the
milk container unit. Then pull the milk container unit forwards to
remove it from the machine.
2 Press the milk container lid release lever (1), tilt the milk container
lid slightly (2) and pull the milk container lid upwards to remove it
from the milk container (3).
3 Pull the release tab at the front of the milk container lid cover
upwards to open the cover.
4 Open the steam inlet by pulling it forward (1) and then move the
steam inlet to the right (2). This part stays attached to the lid by a
hinge.
Note: You can only open the steam inlet if the milk container lid cover is open.
EnglisH 15