Philips SENSEO® Kaffeepadmaschine - Manual (Page 16)

5 Pull the milk tube off the milk container lid.
6 Pour out any milk that is left in the milk container.
7 Clean all parts of the milk container unit.
- if you do not plan to froth milk again straightaway: rinse the
milk container, the milk container lid and the milk tube under a hot tap
within 30 minutes after use.
- after the last use of the day: clean the milk container, the milk
container lid and the milk tube in the dishwasher or with a washing-up
brush in hot water with some washing-up liquid.
Note: Cleaning in the dishwasher is recommended, especially when the milk
container unit is very dirty. Before you put the milk container unit in the
dishwasher, all parts that can be opened should be opened and all detachable
parts should be detached.
8 After cleaning, push back the steam inlet (1), connect the milk tube
(2) and close the milk container lid cover (3).
Note: Push back the steam inlet before you close the lid, otherwise the steam
inlet does not fit anymore.
Note: Make sure you push the milk tube far enough onto the connector so that
the holes in the connector are covered. If you do not push the milk tube far
enough onto the connector, you get less milk froth.
EnglisH
16