8 osd transparency, 9 autoimage setup, 110 12.9 autoimage setup – Barco R500 User Manual
Page 116: Osd transparency, Autoimage setup
![background image](/manuals/52256/116/background.png)
12. Display setup
There is a coarse and a fine adjustment of the position, use ENTER (when sliderbox is displayed) to switch
between the two.
12.8 OSD transparency
What can be done ?
The OSD transparency function allows to make the on screen display (menu) transparent to prevent a part of the image content to
be hidden by the menu.
The level of transparency can be set from 0 to 15.
How to set up the transparency level ?
1. Press MENU to activate the Toolbar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select OSD transparency (image 12-11)
5. Press ENTER
A dialogbox is displayed.
Use the arrow keys or the input field to set the desired transparency.
Image 12-11
12.9 AutoImage Setup
What can be done ?
Autoimage allows to detect automatically the characteristics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
•
Total pixels per line
•
Start pixel
•
Phase
•
Contrast/brightness levels
110
R5976694 IQ PRO R500 01/02/2007