Beko 42WLU530HID - Manual (Page 29)

27
R
L
VIDEO
HDMI input
9.1-Connection types for external devices
VCR/VCD
DVD/PVR
DECODER
CAMCORDER
VIDEO GAME
SCART SOCKET
Note 1:In HDMI mode; some resolutions are
supported when a DVI to HDMI converter
cable from a PC is used.
Note 2: In some graphic cards, when a
connection is made between the TV and
PC with a DVI to HDMI cable, the led will
continue to light as long as the PC is open
even if the TV is turned off.
Your TV is equipped with 10 inputs including
aerial input, which allows for the external
device connection. These inputs are:
1-Aerial input
2-SCART 1 input
3-SCART 2 input
4-SCART 2S input
5-AV (PHONO) input
6-S VIDEO input
7-PC input
8-HDMI 1 input
9-HDMI 2 input
10-YUV Component input
You can connect your external
device supporting the suitable
inputs to your TV via these inputs.
By pressing the AV button on your
remote control, select the external
source input to which you connected your
device.
9.2-PC Mode
Your LCD television can also be used as a
PC monitor via the VGA input.
9.2.1-PC Connection:
Connect the D-Sub15 connector to the
PC-IN input on the rear of your television
using a suitable cable (not supplied with the
television). Again using a suitable cable, you
can also listen to the sound from your PC by
connecting the sound output of your PC to
the PC AUDIO-IN input on the rear of your
television.
9.2.2-Switching to the PC mode
For your LCD-TV to switch to the monitor
(PC) mode, press the AV button on your
remote control. The AV menu appears on
the screen. Select PC by pressing the up/
down movement buttons and press the OK
button.