Beko 42WLU530HID - Manual (Page 17)

15
6.3.5.5-Favourite Lists
Please see 6.3.3.2-Creating favorite channel
list for detailed explanation of this feature.
6.3.5.6-Common Interface Module
To receive subscrıption channels you will
need to purchase a conditional access
module (CAM) and card. When no cam is
fitted the display will show “No Common
Interface module present.” However with a
cam fitted the display will indicate “top up
tv”.
In this menu, you can check the CI Module
settings.
6.3.5.7-System Menu
You can display your television’s hardware
and software data under this menu.
6.4-Performing Analogue
Tuning
You can either tune the Analogue channels
automatically or manually and store them in
your television.
6.4.1-Automatic tuning of channels
and storing in the memory
Note: If your television does not receive any
aerial broadcast for a period of 5 minutes,
it automatically switches to the stand-by
position. The countdown OSD is displayed
on the screen during the last 1 minute
(applicable for Analogue mode only)
You can tune the programs automatically
with the Autoprogram function of your
television and then sort the channels
as you desire by means of the Program
Table. Press AV button on your remote
control, select ANALOGUE TV tab from
the SOURCE menu by using Up/Down
movement buttons and confirm by pressing
the OK button. Your TV will switch to
MENU
AUTOPROGRAM
SEARCHING % 20
STOP
MENU
SETUP
I
S06
0
P13
SELECT BACK
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
Analogue mode. Press the MENU button on
your remote control. Select SETUP tab with
Down movement button and confirm with
OK button. Setup menu is displayed.
Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then
select AUTOPROGRAM tab by using the
Up/Down movement buttons and press
OK button; Country Selection menu will be
displayed.
COUNTRY SELECTION
BELGIUM
CZECH REP
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELANDA
ITALIA
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
START AUTOPROGRAMMING
In the Country Selection menu, select the UK
option, by pressing the right/left movement
buttons and start autoprogramming by
pressing the OK button. The channels will
be automatically searched and those found
will be stored in memory starting from the
program selected in the Setup menu. At the
same moment, the Autoprogram menu will
be displayed and a marker indicating the
progress of the autoprogramming will appear
as shown below.
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.