Beko 42WLU530HID - Manual (Page 25)

23
Note 2: Since the external sources such as
satellite receivers focus on single channel
and transmit it to the TV although they can
receive many channels, other channels that
are received by similar devices can not be
displayed on the POP screen.
Note 3: HDMI2 can not be selected in the
PIP screen when HDMI1 is displayed on the
main screen.
Note 4: Right and left movement buttons do
not control the volume in PIP, PAP and PAT
modes. They can only be used to change
the source.
7.4.3.1-PIP Position
With this option, you can change the display
position of the PIP screen. You can change
the position of the PIP screen in clockwise
by pressing the Pos button when there is a
PIP picture on the screen.
7.4.3.2-PIP Size
With this option, you can increase and
decrease the size of the PIP window. You
can change the PIP size by pressing the
Size button when there is a PIP picture on
the screen.
7.4.3.3-Switching the locations of
the Main screen and PIP screen
When a sub window is open in front of the
main window, you can switch the locations
of the main window and sub window by
pressing the SWAP button on your remote
control.
7.4.4-PAT Mode
With this feature, you can follow the
teletext broadcasts simultaneously
with the current program, provided
that the current program contains
teletext broadcast. For this purpose, when
you press TXT and then 16:9 buttons in
a channel with teletext broadcasting, the
screen will be split into two with the left pane
showing the currently watched program and
the right pane will show the Teletext at the
same time. In the event that you wish to exit
the PAT mode for any reason, simply press
the 16:9 button.