Liebherr HS 885 HD Litronic - Manual (Page 2)

HS 885 HD
Dimensions
Basic machine with undercarriage
4´7´´ 11´1´´
26´5´´
22´2´´
14´1´´
5´2´´
7´9´´
27´2´´
9´3´´
R 18´2´´
50´
17´
39.4´´
18´10´´
21.6´´
56´´
11´
Operating weight
The operating weight includes the basic machine with HD undercarriage,
main winches 66,00 lbs with speed change gear and 36 ft boom,
consisting of A–frame, boom foot (13 ft), boom head section (1 ft),
boom head ( ft) and 53,00 lbs basic counterweight, 33,900 lbs add.
counterweight and 15,400 lbs carbody counterweight.
Total weight approx. 96,700 lbs
Ground pressure
Ground bearing pressure over side, on compact ground 4 psi
Equipment
Main boom max. length 184 f t
Fixed jib (No. 0806.xx) 36 ft – 105 f t
Universal boom head with interchangeable rope pulleys.
Modular designed equipment for operation as crane, with dragline or
clamshell. For dragline operation, a rotating fairlead is fitted into the
boom foot. This minimizes the rope angle to drum, which results in
lower rope wear.
Remarks
The lifting capacities stated are valid for lifting operation only
(corresponds with crane classification according to F.E.M. 1.001,
crane group A1)
Crane standing on firm, horizontal ground.
The weight of the lifting device (hoisting ropes, hook block, shackle
etc.)must be deducted from the gross lifting capacity to obtain
a net lifting value.
Additional equipment on boom (e.g. boom walkways, auxiliary jib)
must be deducted to get the net lifting capacity.
For max. wind speed please refer to lift chart in operator’s cab or
manual.
Working radii are measured from centre of swing and under load.
The lifting capacities are valid for 360 degrees of swing.
The structures are calculated according to F.E.M. 1.001 – 1998
(EN 13001–/ 004).
ANSI B 30.5
1.
.
3.
4.
5.
6.
7.
8.
9.
HS885_englisch_usa.indd 2 06.03.2008 15:01:44