Liebherr UIK 1550 Premium - Manual (Page 9)

4.4.1 Adjusting the door inclination
Fig. 21
Note
u Always make the adjustment on both sides, left and right!
u Lift off the vegetable bin Fig. 21 (31) and bottle rack
Fig. 21 (32) .
Fig. 22
u Unscrew and remove the screw Fig. 22 (33) .
w Dispose of the screw Fig. 22 (33) , it is no longer needed.
u Just loosen the screws Fig. 22 (34) by 1 to 2 turns.
u Turn the adjusting screw Fig. 22 (35) . Clockwise: for inclina-
tion of the door away from the appliance body at the top.
Anticlockwise: for inclination of the door towards the appli-
ance at the top and away from the appliance body at the
bottom.
u After having adjusted the inclination, re-tighten all the
screws Fig. 22 (34) .
4.4.2 Aligning the position of the door
Note
u Always make the adjustment on both sides, left and right!
Fig. 23
Vertical adjustment, Y:
u Unscrew and remove the screws Fig. 23 (36) .
w Dispose of the screws Fig. 23 (36) , they are no longer
needed.
u Just loosen the screws Fig. 23 (37) by 1 to 2 turns.
u Turn the adjusting screw (38). Clockwise: for moving the
door upwards by 4 mm max. Anticlockwise: for moving the
door downwards by 2 mm max.
u Re-tighten all the screws Fig. 23 (37) .
Lateral adjustment, X:
u If the screws Fig. 23 (36) are still present, unscrew and
remove them.
u Just loosen the screws Fig. 23 (37) by 1 to 2 turns.
u Turn the adjusting screws Fig. 23 (39) according to the
lateral adjusting direction wanted.
u After having made the lateral adjustment, re-tighten the
screws Fig. 23 (37) .
u Re-insert the bottle rack Fig. 21 (32) and vegetable bin
Fig. 21 (31) .
4.5 Disposing of packaging
WARNING
Danger of suffocation due to packing material and plastic film!
u Do not allow children to play with packing material.
The packaging is made of recyclable materials:
- corrugated board/cardboard
- expanded polystyrene parts
- polythene bags and sheets
- polypropylene straps
- nailed wooden frame with polyethylene panel*
u Take the packaging material to an official collecting point.
Putting into operation
* Depending on model and options 9