Liebherr UIK 1550 Premium - Manual (Page 11)

5.6 Storage in the recess at the base
Fig. 26
u Unopened and tightly sealed bottles and packs can be
stored in the storage recess at the base.
6 Maintenance
6.1 Defrosting
6.1.1 Defrosting refrigerator compartment
The refrigerator compartment is defrosted automatically. The
water evaporates. Drops of water on the rear wall are function-
ally conditioned and perfectly normal.
u Clean the drain hole at regular intervals to allow the defrost
water to drain (see 6.2) .
6.2 Cleaning the appliance
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
u Do not use any steam cleaners!
NOTICE
Incorrect cleaning damages the appliance!
u Do not use cleaning agents in concentrated form.
u Do not use any scouring or abrasive sponges or steel wool.
u Please do not use any aggressive, scouring, sand-,
chloride-, chemical- or acid-based cleaning agents.
u Do not use chemical solvents.
u Do not damage or remove the type plate on the inside of the
appliance. It is important for the customer service.
u Do not pull off, bend or damage cables or other compo-
nents.
u Do not allow any cleaning water to enter the drain channel,
ventilation grille or electrical parts.
u Please use soft cleaning cloths and a universal pH-neutral
cleaning agent.
u Please use cleaning and care products suitable for contact
with foodstuffs in the appliance interior.
u Empty appliance.
u Pull out the power plug.
u Clean the vent grille regularly.
w Dust deposits increase energy consumption.
u Clean plastic outer and inner surfaces with lukewarm
water and a little washing-up liquid.
u Clean drain hole: Remove
deposits with a narrow
instrument, e.g. a cotton
bud.
u Clean items of equipment by hand with lukewarm water
and a little washing-up liquid.
Fig. 27
u Removing the shelf: Lift the shelf at the back and draw it
forwards, as illustrated.
Note
u If the shelf can no longer be extended as far as originally,
then extend the telescopic rails all the way. The ball
retainers of the telescopic rails are realigned in the process
and maximum extension is restored.
u Only use a damp cloth to clean the telescopic rails. The
grease in the runners is for lubrication purposes and must
not be removed.
u To dismantle shelf: lift off the retainers Fig. 27 (1) , strip the
holders Fig. 27 (2) off the retainers Fig. 27 (3) and remove
the side elements Fig. 27 (4) from the glass base.
Fig. 28
u Inserting the shelf: Retract the telescopic rails.
Maintenance
* Depending on model and options 11