BT Converse 2-line Telephone - Manual (Page 23)

20
• Drill two holes for the screws and insert
the wall plugs (if required).
• Insert the screws leaving about 4mm
free on which to hang the phone.
• Plug the line cords into the telephone
sockets.
• Place the holes on your wall mounting
bracket over the screws and gently slide
the phone down to make sure it is
securely in place.
• Now slide out and rotate the handset
hook so that you can hang up the
handset when the phone is wall mounted.
• If you need to put the handset down
during a conversation, place it on the
handset park clip at the top of the phone.
• Use the wall mounting template below
for marking the drill holes.
83mm