BT Converse 2-line Telephone - Manual (Page 13)

During a call:
Press the HANDSFREE button.
The Speaker light comes on.
Place the handset on the base.
Your call is now on the loudspeaker.
During a call, you may wish to
keep your conversation more
private.
Lift up the handset. The Speaker
light goes out.
Continue your call using the
handset.
H
an
dsf
ree
Press buttons in order shown
Press and hold down the Line 2
button.
Press the HANDSFREE button.
The Speaker light and Line 2 light
both come on. Release the Line 2
button.
Adjust the VOLUME switch and
listen for the dial tone.
DIAL Dial the number your require.
To end the call, press the
HANDSFREE button. The Speaker
and Line 2 lights go out.
When a call is placed on hold,
you cannot hear your caller and
they cannot hear you.
During a call:
Press and release the HOLD
button. The
IN USE light changes
from red to green and the call is
on hold.
To take the call off hold, press the
Line 1 or 2 button (depending on
which line you are using again.
The green light changes back to
red and you can talk to your caller.
Line 2
Line 1
Ho
ld
H
an
dsf
ree
H
an
dsf
ree
Line 2
10
To put a handsfree call on hold
To make a handsfree call on
Line 2 To switch from handset to
handsfree
To switch from handsfree to
handset