BT Converse 2-line Telephone - Manual (Page 17)

Press the SHIFT button to select
UPPER or LOWER if necessary,
then press the
M1-M10 Quickdial
•
button you want.
Press the FUNCTION button twice.
Press the SHIFT button to display
UPPER or LOWER.
•
Press the Quickdial memory
button ( M1-M10 ) you want to
delete. The stored number is
displayed.
Press and release the HOLD
button. Display shows
ERASE.
Press the FUNCTION button to
delete – you get a beep to
confirm – or the
HANDSFREE
button to cancel.
Fu
nction
Ho
ld
Shift
Fu
nction
Shift
14
To view numbers stored in
the memories
To view another Quickdial
number
To delete numbers stored in the
Quickdial memories
To dial a Quickdial number
PLEASE NOTE
If you press the Quickdial M1-M10
button you want it will be automatically
dialled out.
Press buttons in order shown
Lift the handset or press the
HANDSFREE button. (To dial on
Line 2, press and release the
Line 2 button after you have
pressed the Handsfree button.)
Press the SHIFT button (if
necessary) to select the
UPPER or
LOWER memory and listen for the
dial tone.
•
Press the Quickdial M1-M10
button you want. The number is
dialled.
If dialling a Quickdial number
when using the loudspeaker,
remember to check that Line 1 is
free as this line is automatically
selected in preference to Line 2.
Check which line you wish to use.
Press the FUNCTION button twice.
Press the SHIFT button to display
UPPER or LOWER.
•
Press the Quickdial memory
button ( M1-M10 ) you want to view.
The stored number is displayed.
Shift
Fu
nction
Shift
Line 2
H
an
dsf
ree