BT 3500 User Manual
Page 43
Press the NEW option button.
You will hear, “Please speak
after the tone. To end recording,
press #”.
After the tone, speak your
outgoing message into the
handset. Press the
#
button
when you have finished.
Throughout recording
r
will
flash on the base unit display.
The prompt will announce,
“Your outgoing message is”
,
and then play your message.
Note
Recording, checking or playing your
outgoing message does not set it as the
current outgoing message to be played
when your answering machine takes a
call, you will need to set the answer
mode, see page 43.
Quartet 3500 User Guide ~ 5th Edition ~ 3rd March ’03 ~ 5271
40
To record your own Answer
and Record outgoing
message
You can record your own
Answer and Record outgoing
message to use instead of the
pre-recorded message already
available. Your outgoing
message can be up to 3 minutes
long. You can reinstate the
pre-recorded outgoing message
later if you wish to, see page 44.
Pick up the handset.
Press the UP or DOWN button
until the display shows
Answer
Settings
.
Press the OK option button.
Press the UP or DOWN
button until the display shows
Outgoing Message
.
Press the OK option button.
The display will show
Answer
and Record
.
Press the OK option button.
The display will show
Outgoing
Message
, and will play your
Answer and Record message
immediately via your handset.
OK
OK
OK
NEW