BT 3500 - Manual (Page 41)

Audible message alert
When new messages have been
received, your Quartet 3500 will beep
every 10 seconds (when audible message
alert is switched ON). The volume of
the beep is at the volume you have set
for the loudspeaker. The default setting
is OFF.
When the answering machine
is in the idle mode:
Press and hold the ᮤ SKIP
button on the base unit to
change the setting.
The prompt will announce
“Message alert on/off”
as
appropriate.
To set audible message alert
via the base unit
Quartet 3500 User Guide ~ 5th Edition ~ 17th January ’03 ~ 4393
38
To change the answer
delay setting via the handset
Press the UP or DOWN button
until the display shows
Answer
Settings .
Press the OK option button.
Press the UP or DOWN button
until the display shows
Answer
Delay .
Press the OK option button.
The current setting will be
highlighted.
OK
When you hear the setting you
want, do not press the Skip
ᮣ
button again. After a short
delay your chosen setting will
be announced.
To check the answer delay
setting
Press and release the Skip ᮣ
button on the base unit.
The current setting will be
announced and also shown on
the base unit display.
Skip
Use the UP or DOWN button
to highlight the setting you
require from between 2 and 9
or TS.
Press the OK option button to
confirm.
Press the CLEAR button until
you return to the standby
screen.
OK
OK
Skip