BT 3500 - Manual (Page 39)

Quartet 3500 User Guide ~ 5th Edition ~ 17th January ’03 ~ 4393
36
DISPLAY DEFINITION
(Blank) Power off.
C-0 (flashing) Day/Time needs to be set.
0-9 Answer-on mode, 0-9 messages.
9 (flashing) 10-59 messages. Indicating more than
9 messages stored.
–– Power on, but answer off mode
Alternating The display flashes between a
with dash and the number of
0-9 messages saved in the memory.
A (flashing) Handset menu and Remote
access in progress.
E (flashing) Error.
F (flashing) Memory full.
P (flashing) Message paused.
P-1: When selecting or playing
Answer & Record outgoing
message.
P-2: When selecting or playing
Answer Only outgoing message.
r (flashing) Message recording (memo,
outgoing message or incoming
message).
t or 2 to 9 Setting or reading answer delay.
8-0 Counting down.
To switch the answering
machine ON/OFF
You can switch the answering
machine on and off using the
base or the handset.
Switch on/off using the base:
Press and release the ANS
ON/OFF button to switch ON
or OFF.
If you hear, “Answer on, your
outgoing message is....”
, the
answering machine is
switched ON and is ready to
answer incoming calls and
record any messages (unless
Answer Only is selected which
is an advisory announcement
only and does not allow
messages to be recorded).
The display on the base
unit shows the number of
messages stored in the
memory.
If you hear, “Answer off ”, the
answering machine is
switched OFF.
The display on the base unit
will flash between a dash and
the number of messages saved
in the memory.
Ans
On Off
Message
display
LED
Page
Quartet 3500
Play
2