beautypg.com

Parking brake adjustment, Caution – Briggs & Stratton 5900692 User Manual

Page 18

background image

S200X 25HP & 27HP - 61” Mower Deck

TP 300-7333-02-M2-SP

7/2007

18

Figure 35. Parking Brake Adjustment
A. Brake Spring
B. Adjustment Nut

Parking Brake
Adjustment

1. Disengage the PTO, engage the parking brake, stop

the engine and remove the ignition key.

2. Locate the brake spring (A, Figure 35).

3. With the parking brake engaged, measure the

compressed spring length. The spring should be
2” - 2-1/8” (5,0 - 5,4 cm) when compressed.

4. If the spring is not within this range, release the

parking brake and turn the adjustment nut (B) to
compress or release the spring.

5. Engage the parking brake and remeasure the spring.

CAUTION

Do not adjust the spring to be shorter than
1-15/16” (4,9 cm) when compressed. This may
damage the brake mechanism.

2" - 2-1/8"

(5,0 - 5,4cm)

A

B

This manual is related to the following products: