Philips Robot de cuisine - Manual (Page 14)

ENGLISH 14
The process starts running and stops if the STOP-
button is pressed.
C
5 Press half of fruit firmly on the rotating
cone.
Tips
◗ Stop pressing from time to time to remove
the pulp from the sieve.
When you do so, switch off the appliance and
remove the bowl along with the sieve and cone.
C
◗ After use, remove the bowl along with the
Citrus press accessories to prevent juice from
leaking onto the appliance.
Juice extractor
The juice extractor can be used for preparing
fresh fruit and vegetable juices. Pulp, pips and skins
will be separated.
1 Put the bowl on the motor unit.
C
2 Put the toolholder in the bowl.
1
2
C
3 Attach the juicer drum on the toolholder.
C
4 Insert the pulp sieve into the juicer drum
and ensure that all 3 pins fit into the
notches of the juicer drum.
C
5 Put the lid of the juice extractor on the
bowl.
C
6 Press the juice extracting button.
Never use the juicing accessory if the rotating
sieve or drum is damaged.
The appliance will start with a slow start and
reaches finally maximum speed.The speed can be
decreased by pressing - button.The appliance will
turn off if the STOP button is pressed.
1
2