beautypg.com

How to use – Black & Decker CYCLONE BLC12600BUC User Manual

Page 3

background image

† . Lid cap (Part # 08FI)
† . Lid (Part # 08EE)
† . Perfect Pour™ blending jar 6 cups / 8 oz. / 0 ml (Part # 9900)
. Handle
† . Blade assembly (Part # 77766)
† 6. Gasket (Part # 096-)
† 7. Jar base (Part # 098EZB)
8. Speed buttons
9. display
0. PULSE/OFF button
. Base
Note: † indicates consumer replaceable/removable parts

Product may vary slightly from what is illustrated.

How to Use

This unit is for household use only.
GETTING STARTEd
• Remove all packing material and any stickers from the product.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARe ANd CleANING section of

this manual.

BLENdER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on countertop or work

surface.

2. Put the gasket on top of the blade assembly.
3. Place the blade assembly with gasket in bottom opening of the jar with

blades down.

4. Place jar base onto jar and rotate clockwise until

it is tight (A).

5. Turn assembled jar right side up.
6. Place lid with lid cap on blender jar.
7. Uncoil power cord from storage area under the

base.

8. Place jar assembly in unlocked position on base

and turn jar clockwise until jar is in the locked

position (B).

9. Blender is now ready for use.

USING YOUR BLENdER
Important
• If the appliance overheats, please unplug, wait 0 seconds and then plug

in again. If it happens again, repeat the same process.

• If appliance runs for more than minutes, the motor will shut off. If this

occurs, press any speed button to resume operation.

• If the PULSE function stops working, simply unplug the power cord and

wait seconds for the unit to reset. For HIGH / LOW function, press any

speed button to start blending again.

1. Make sure appliance is unplugged.
2. Place foods to be blended into jar, liquid first.
3. Place lid on jar; make sure lid cap is in place.
4. Place the jar on the base of the blender.
5. Plug power cord into outlet. The word oN appears on the lCd and remains

on until the blender is unplugged.

A

B

ENGLISH

This manual is related to the following products: