Black & Decker Crush Master BL10450HUC - Manual

Size: 19.685" x 17.5"
NEED HELP?
For service, repair or any questions
regarding your appliance, call the
appropriate 800 number on cover of this
book. Please DO NOT return the product to
the place of purchase. Also, please DO NOT
mail product back to manufacturer, nor bring
it to a service center. You may also want to
consult the website listed on the cover of this
manual.
Two-Year Limited Warranty
(Applies only in the United States
and Canada)
What does it cover?
• Any defect in material or workmanship
provided; however, Applica’s liability will
not exceed the purchase price of product.
For how long?
• Two years after date of purchase.
What will we do to help you?
• Provide you with a reasonably similar
replacement product that is either new or
factory refurbished.
How do you get service?
• Save your receipt as proof of date of sale.
• Visit the online service website at www.
prodprotect.com/applica, or call toll-free
1-800-231-9786, for general warranty
service.
• If you need parts or accessories, please
call 1-800-738-0245.
What does your warranty not cover?
• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any
way
• Products used or serviced outside the
country of purchase
• Glass parts and other accessory items
that are packed with the unit
• Shipping and handling costs associated
with the replacement of the unit
• Consequential or incidental damages
(Please note, however, that some states
do not allow the exclusion or limitation of
consequential or incidental damages, so
this limitation may not apply to you.)
is a registered trademark of The Black & Decker Corporation,
Towson, Maryland, USA
es una marca registrada de The Black & Decker Corporation,
Towson, Maryland, E.U.
R12009/4-14-88E/S
Please Read and Save this Use and Car e Book.
IMPORTANT SAFEGUARDS
When using electric al applianc es, basic safety prec autions should
always be foll ow ed, including the foll owing:
❍ Read all instructions.
❍ To prot ect agains t risk of el ectrical shock do not immer se cor d,
plugs or appliance in wat er or other liquid.
❍ Close supervision is neces sary when any applianc e is used by or
near childr en.
❍ Unplug fr om outl et when not in use, bef ore putting on or taking
off parts, and bef ore cleaning.
❍ Avoid cont acting mo ving parts.
❍ Do not operat e any appliance with a damaged cor d or plug or
after the applianc e malfunctions, or is dropped or damaged in
any manner . Return appliance to the near est authorized service
facility or call the appr opriate toll-fr ee number on the front of
this manual for examination, repair or el ectrical or mechanic al
adjustment. Or, call the appr opriate toll-fr ee number on the
cov er of this manual.
❍ The use of att achments, including canning jars, not
rec ommended by the manuf acturer may cause fire, electric
shock or injury.
❍ Do not use outdoor s.
❍ Do not let cor d hang over edge of tabl e or count er.
❍ Keep hands and ut ensils out of cont ainer whil e bl ending to
reduc e the risk of sever e injury to persons or damage to the
blender . A scraper may be used, but must be used onl y when the
blender is not running.
❍ Blades ar e sharp. Handle car efully.
❍ To reduc e the risk of injury, ne ver place cutter-as sembly blades
on base without jar properl y att ached.
❍ Always operat e bl ender with cov er in place.
❍ When bl ending hot liquids, remo ve cent er piec e of two-piec e
cov er.
SAVE THESE INSTRUC TIONS.
This product is f or household use only.
POLARIZED PL UG (120V Models Onl y)
This applianc e has a polarized plug (one blade is wider than the other). To
reduc e the risk of electric shock, this plug is intended to fit int o a polarized
outlet only one way . If the plug does not fit full y int o the outlet, rev erse the
plug. If it still does not fit, cont act a qualified el ectrician. Do not att empt to
modify the plug in any way .
TAMPER-RESIST ANT SCREW
War nin g: T his ap plia nce is eq uip ped w ith a tam per -re sis tan t s cre w to
pre ven t r em ova l o f th e o ute r c ove r . T o r edu ce the ri sk of f ire or el ect ric
sho ck, do no t a tte mpt to re mov e th e o ute r c ove r . T her e a re no use r-
ser vic eab le par ts ins ide . R epa ir sho uld be do ne onl y b y a uth ori zed se rvi ce
per son nel .
ELECTRIC AL CORD
a) A short po wer-suppl y cor d (or detachabl e po wer-suppl y cor d) is to be
provided to reduc e the risk resulting from becoming entangl ed in or
tripping ov er a longer cor d.
b) Longer detachabl e po wer-suppl y cor ds or ext ension cor ds ar e av ailable
and may be used if car e is exer cised in their use.
c) If a long detachabl e po wer-suppl y cor d or ext ension cor d is used,
1) The mark ed el ectrical rating of the detachabl e po wer-suppl y
cor d or ext ension cor d should be at leas t as great as the
electric al rating of the appliance,
2) If the appliance is of the gr ounded type, the ext ension cor d
should be a gr ounding-type 3-wir e cor d, and
3) The longer cor d should be arr anged so that it will not drape
over the count ertop or tabl etop where it can be pull ed on by
children or tripped over .
Note: If the pow er suppl y cor d is damaged, it should be replac ed by
qualified per sonnel; in Latin Americ a, by an authorized service cent er.
† 1. Lid cap (Part # 081049)
† 2 Lid (P art # 081050DZ102 (W), 081050EE (B), BL10450HR-02 (R))
† 3. Blending glass jar [48 oz. / 1.4 L] (Part # 99002)
4. Handle
† 5. Gasket (Part # 09150)
† 6. Blade as sembly (Part # 77766)
† 7. Jar base
(Part # 03474DZ101 (W), 03474EB (B), BL10450HR-06 (R))
8. Blender base
9. Control panel (see A2 for details)
10. Hi/Low Button
11. ICE CRUSH button
12. Pulse/Off butt on
13. Speed butt ons
Note: † indic ates consumer replac eable/r emovabl e parts
Product may vary slightly from what is illustr ated.








 How to Use This unit is for household use only.
GETTING ST ARTED
• Remove all packing material and any stick ers from the pr oduct.
• Please go to www.pr odprot ect.com/applic a to regis ter your warranty .
• Wash all remo vabl e parts as ins tructed in C ARE AND CLEANING section of this
manual.
• Wipe outside of applianc e with a damp cloth; dry thor oughly.
BLENDER JAR ASSEMBL Y
1. T urn bl ending jar upside do wn and place flat on count ertop or w ork surf ace.
2. Put gasket on top of blade assembl y.
3. Plac e blade assembl y with gasket into bottom opening of the jar with blades
facing down.
4. Plac e jar base ont o jar and rot ate clockwise until it is tight.
5. T urn as sembled jar right side up.
6. Plac e lid with lid cap onto blending jar.
7. Unc oil po wer cor d fr om st orage area under the base.
8. Plac e jar assembl y in unlock ed position on base and turn jar cl ockwise until
jar is in the lock ed position.
9. Bl ender is now ready for use.
USING YOUR BLENDER
1. Mak e sur e applianc e is OFF.
2. Plac e foods to be bl ended int o jar .
3. Plac e lid on jar; make sure lid cap is in place.
4. Plug pow er cor d int o outl et.
Note: When in use, do not leav e bl ender unatt ended. When using har d foods, such
as ic e, cheese, nuts and coff ee beans, keep one hand on the lid to keep blender in
place.
5. Sel ect the speed that best suits your desired task. Pres s Hi/Lo w with the task
button to switch speeds. (See SPEED CHART)
6. When blending thick mixtur es, such as smoothies, pow er drinks and
milkshakes pres s the Pulse butt on se ver al times to begin the blending
proc ess. Pres s the Pulse butt on for no mor e than 5 sec onds at a time. This
helps br eak up the ic e.
7. Open the lid cap to add ingr edients whil e the blender is running and dr op
ingredients through the opening.
Important: Do not remo ve the lid while the bl ender is running.
8. When finished, pr ess the Pulse/Off button. Make sure blades hav e compl etel y
stopped befor e att empting to remo ve the bl ending jar from the base.
9. T o remo ve the jar, grasp the handl e, turn slightly count ercl ockwise to unlock,
befor e lifting up.
10. Remo ve lid to pour.
11. Al ways unplug the applianc e when not in use.
ICE CRUSH BUTTON
1. To crush ic e, pour liquid in blending jar fir st, then add 1 cup (about 6 ice
cubes).
2. Hold one hand firml y on lid and pulse, using the Ic e Crush button (pres s Ic e
Crush butt on at 5-second interv als).
Tip: Use the lid cap to measure ingredients up to 60 ml / 2 oz. when adding
ingredients like lemon juice, cream, or liqueur s.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Before cleaning, turn off and unplug appliance.
2. Lift blending jar by handle off power base.
3. Remove jar base by turning counterclockwise until loose.
4. Remove gasket and blade assembly.
Caution: Blades are sharp, handle carefully.
5. Remove lid and lid cap.
6. Wash removable parts by hand or in your dishwasher. Place jar on bottom rack
and rest of parts on top-rack only.
FAST CLEAN
For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap in the
blending jar. Cover and blend on Fast Clean for about 30 seconds. Discard liquid
and rinse jar thoroughly.
Important:
• Do not place jar parts in boiling liquids.
• Do not immerse base in liquid. Wipe base with damp cloth and dry thoroughly.
• Remove stubborn spots by rubbing with damp cloth and nonabrasive cleaner.
Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. Do not
use rough scouring pads or cleansers on parts or finish.
STORAGE
For convenient storage, wrap the cord around the feet on the bottom of the
blender base.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Jar bottom does not
come off of jar.
A vacuum has been
formed.
Place the jar on the blender
and turn counter clockwise
until jar is released from the
bottom
Liquid is leaking from
bottom of jar.
Gasket is either
missing or not in
place correctly.
Check that jar is assembled
correctly.
Appliance does not
turn on.
Appliance is not
plugged in.
Check that appliance is
plugged into a working
outlet.
Mixture in blender
does not seem to be
blending.
Not enough liquid in
mixture being blended
or too much ice.
Turn the blender off and
use a rubber spatula to
redistribute the food; add
some liquid and PULSE
the mixture to aid in the
blending process.
Herbs or bread are
sticking to sides
of blender and not
getting chopped.
Blender jar, food to be
chopped or blade are
not dry.
Always make sure that the
jar, the blade and the food to
be chopped are dry.
Jar separates from
bottom when being
removed from
blender. Liquid spills
onto counter.
Jar was twisted when
being removed from
base of blender.
When removing jar from
blender base, simply lift up;
do not twist.
Food chopped is too
fine or watery.
Food is over
processed.
Use PULSE in short bursts
or blend for a shorter time. SPEED CHART
Pulse/Off: Use for thick mixtures
Fast Clean: Combine drop of dishwashing liquid and hot water to clean blender
Stir: Liquefy frozen juices, drink mixes and condensed soups • Prepare salad
dressings • Puree hot liquids
Grate: Grate hard cheeses and coconut • Make superfine sugar • Make cookie,
cereal and bread crumbs • Grind coffee beans, spices and chocolate
Puree: Blend protein drinks • Puree baby foods – fruits and vegetables
Beat: Beat eggs for omelets and custards
Crumb: Make cookie, cereal and bread crumbs
Liquefy: Liquefy frozen drinks
Chop: Chop fruits and vegetables • Chop cooked meats • Chop nuts,
coarse-to-fine
Whip: Mix puddings • Combine pancake and waffle batter or mixes • Beat eggs
for omelets and custards
Blend: Prepare sauces • Remove lumps from gravies
HI/LOW: Select to change speed between Hi and Low • Hi – the button is out
• Low – the button is in.
How does state law relate to this warranty?
• This warranty gives you specific legal rights. You may also have other rights that vary from
state to state or province to province.
Código de fecha / Date Code
© 2009 - 2010 Applica Consumer Products, Inc.
Made in People’s Republic of China
Printed in People’s Republic of China
Fabricado en la República Popular de China
Impreso en la República Popular de China
Importado por / Imported by:
APPLICA AMERICAS, INC.
Av. Juan B Justo 637 Piso 10
(C1425FSA) Ciudad Autonoma de Buenos Aires
Argentina
C.U.I.T No. 30-69729892-0
Importado por / Imported by:
APPLICA MANUFACTURING, S. DE R. L. DE C. V.
Presidente Mazarik No111, 1er Piso
Col. Chapultepec Morales, Mexico D.F
Deleg. Miguel Hidalgo
CP 11570
MEXICO
Teléfono: (55) 5263-9900
Del interior marque sin costo
01 (800) 714 2503
MODELS/MODELOS
❍
BL10450H
❍ BL10450HB
❍ BL10450HR
Customer Care Line:
USA/Canada
1-800-231-9786
Mexico
01-800 714-2503
Accessories/Parts
(USA / Canada)
Accesorios/Partes
(EE.UU / Canadá)
1-800-738-0245
For online customer service
and to register your product, go to
www.prodprotect.com/applica
CRUSH MASTER ®
450-WATT
BLENDER
LICUADORA
CRUSH MASTER ®
DE 450 WATTS




450 W 120 V~ 60 Hz
Sello del Distribuidor:
Fecha de compra:
Modelo:
Comercializado por:
Applica Manufacturing, S. de R. L. de C.V.
Presidente Mazarik No 111, 1er Piso
Col. Chapultepec Morales, Mexico D.F
Deleg. Miguel Hidalgo
CP 11570
MEXICO
Servicio y Reparación
Art. 123 No. 95
Col. Centro, C.P. 06050
Deleg. Cuauhtemoc
Servicio al Consumidor,
Venta de Refacciones y Accesorios
01 800 714 2503