Belkin Enhanced Wireless USB Adapter 8820-00050ea F6D4050 - Manual (Page 32)

30
Enhanced Wireless USB Adapter
sections table of contents 1 2 3 4 6 5
TroUBlESHooTIng
Problem:
The name of your wireless network appears in “Available Networks” .
Solution:
If the correct network name is listed in the “Available Networks” list,
please follow the steps below to connect wirelessly:
1 . Click on the correct network name in the “Available Networks” list .
2 . If the network has security (encryption) enabled, you must enter
the network key . Click “Connect” . For more information regarding
security, see the page entitled: “Connecting to a Secure Wi-Fi
Network” on page 22 of this User Manual .
3 . Within a few seconds, the tray icon in the lower right-hand corner of
your screen should turn green, indicating a successful connection
to the network .
If you are still unable to access the Internet after connecting to the
wireless network, please contact Belkin Technical Support .
Problem:
The name of your wireless network DOES NOT appear in the list of
“Available Networks” .
Solution:
If the correct network name is not listed, check the SSID settings to
see if they match . The SSID is case-sensitive and the spelling on each
computer must be exactly the same in order for the Adapter to connect
to the wireless router (or access point) .
note: To check the SSID settings or look for an available network,
double-click the Signal Indicator icon to bring up the “Wireless
Networks” screen . Click “Add” if you do not see the network you
are trying to connect to and type in the SSID . For more information
about setting up an SSID, please reference your router manufacturer’s
user manual .
If issues persist even at close range, please contact Belkin
Technical Support .