beautypg.com

Atio, Nstallation – Broilmaster PCB1-2 User Manual

Page 14

background image

B101586-4-0112

Page 14

NOTICE: Assemble post before assembling grill.

The SS26P and BL26P Patio Bases are only for use with Broilmaster

Gas Grills. Before proceeding with installation read your Owner’s

Manual for the proper location and minimum clearances to com-

bustible materials for your grill and in-ground post.
Verify that all parts listed in the exploded view of this product have

been included before beginning this installation.
Recommended Tools:

Drill/Driver

Two adjustable wrenches or a socket set

A medium Phillips screwdriver

Pipe thread sealer or Teflon tape (for gas connections)

Soapy water solution (to test for leaks)

1. For Stainless Steal Posts attach lower bracket assembly

to post with eight Hex Head #10-1/2” Self Drill screws. For

Black Posts, secure lower bracket assembly to post with eight

10 x 1/2 Hex Head screws. See Figure 1. Use black screws for

black posts and stainless steel screws for stainless steel posts.

NOTE: The large rectangular cut out is located at the front of the

post near the top.

Figure 1

p

Atio

b

ASE

i

nStAllAtion

2. Fasten the bottom of the post to the cast base using 1/4 x 1/2

Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2.

Anchor the cast iron patio base to your patio using the two holes

provided in the base. (Hardware not included)

Note: Make sure that the large rectangular cut out is facing in

the direction that you want your grill to face.

Figure 2

3. Insert the stainless steel flex tube assembly into the post. The

inlet side of the gas tubing may protrude from the bottom of

the patio base or through the large circular hole in the back of

the square post. See Figure 3. Note: Do not attempt to cut or

alter the flex tube in any way.

Figure 3

4. Attach the grease cup bracket assembly to the bottom of the

grill casting and fasten with #10-24 x 3/4” bolt, 9/32 ID x 5/8

OD washer, and #10-24 wing nut. See Figure 6.
Use only the supplied grease cup or noncombustible contain-

ers for the grease cup (aluminum or tin cans). DO NOT use

combustible containers such as paper or Styrofoam cups.

Figure 4

This manual is related to the following products: