BMW CPT 9000 - Manual (Page 15)

To operate the BMW mobile phone using the equipment in
the vehicle, it must be placed in the cradle.
While using BMW Assist, you will not be able to operate
the BMW mobile phone until after you have completed the
service.
Switching the mobile phone on/off
The following applies when the mobile phone is in its
cradle:
With the ignition key in position 1 or higher, the battery is
charged and the mobile phone is switched on automati-
cally.
After the ignition is switched off, the mobile phone auto-
matically switches off after the delay period has elapsed.
To spare the car’s battery, avoid using the phone
when the ignition is switched off.
Inserting the mobile phone
1. Remove the protective plug from the antenna con-
nector on the back of the mobile phone if necessary
2. When using the V60i move button (1) to the forward
position. This will bring the connector (2) down to the cor-
rect position in order to insert the handset.
When using the V60S move button (1) to the back
position. This will raise the connector (2) to the
correct position in order to insert the handset.
3. Insert the mobile phone and press down lightly until
it snaps into place.
Removing the mobile phone
Press the button on the cradle.
If you are talking on the BMW mobile phone at the time,
the connection ended as soon as you take the phone out
of the cradle. If you want to maintain the connection, open
the flip phone before pressing the eject button.
Getting started with your BMW CPT 9000
11