Notice, Perations, Pet hair lifter – Bissell PET HAIR ERASER 3920 User Manual
Page 8: Transporting cleaner, Clean filter indicator
1.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
O
perations
8
Pet Hair Lifter
1. To vacuum carpeting, while vacuum is in
upright position flip down until it clicks into
place on the front of the foot. Turn height
adjustment knob to pet hair setting.
2. To vacuum non-carpet surfaces flip up. Push the
yellow release button just above the feature,
and it will flip up and out of the way.
transporting cleaner
1. To move your cleaner from room to room, put
the handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
2. The cleaner can also be moved by using
the carrying handle.
clean filter indicator
the clean filter indicator tells you when
the air flow in your vacuum is reduced
due to dirty filters or a clog in the hose.
the indicator will remain green while
the unit is running until the airflow
is reduced by a clog or dirty filter. At
that time, it begins to change to red or
black. When it is fully red, the airflow
is reduced or clogged by a dirty filter.
Follow steps on page 11 to clean your
filters. All filters in the vacuum should
be cleaned or replaced when the
indicator turns red.
If the indicator turns black, there is a
clog in your hose. to check and remove
the clog, remove the hose from the unit
by turning the twist ‘n Snap hose to
the right. try to visually locate the clog,
then use a blunt long object such as a
broom handle to loosen and remove
the debris. once completed, reassem-
ble the hose to the unit.
If the indicator remains red or black
with the vacuum running, follow the
steps on page 15 to check for and
clear clogs.
notE: When your vacuum is turned
off, the clean filter indicator will go to
the red color setting. the clean filter
indicator only detects reductions in air-
flow when the vacuum power is on.
2.
notIcE:
While vacuuming, certain
carpets and low humidity
conditions may generate small
static discharges. The discharges
are entirely harmless and are
not associated in any way with
the main power supply.
Clean Filter
Indicator
2b.
2a.
right way to carry
wrong way to carry
1.