Bissell 3750 SERIES-220-240V EN - Manual (Page 5)

5
this user’s guide has been designed to help
you get the most satisfaction from your bISSEll
lift-off. you’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
please read this user’s guide thoroughly before
assembling your vacuum cleaner.
pay particular attention to the product diagram,
assembly instructions, and part names. locate
and organize all parts before assembly. familiarize
yourself with the parts and where they go.
following this user’s guide will greatly enhance
your ability to get the most performance from your
bISSEll lift-off for many years.
the only tool you'll need to assemble your
vacuum cleaner is a phillips screwdriver.
Attach handle to vacuum
1. Locate the vacuum handle and remove
the screw packet taped to the base of the
handle.
2. Stand the vacuum upright and slide the base
of the handle firmly into the grooves at the top
of the vacuum body.
3. Check to be sure the handle is fitted to the
vacuum body. If there is a gap in front, continue
to push firmly until the handle is flush.
4. Insert two of the screws from the screw
packet into the existing holes. Tighten securely
with a screwdriver.
H
ow to put it together
A
ssembly
WaRnInG:
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
w w w . b i s s e l l . c o m
WaRnInG:
plastic film can be
dangerous. to avoid
danger of suffocation,
keep away from babies
and children.