Bissell 3750 SERIES-220-240V EN - Manual (Page 10)

10
w w w . b i s s e l l . c o m
Power cord storage
When you are done using your bISSEll lift-off, return
it to the upright position and store the power cord.
1. Turn vacuum cleaner off (O).
2. Unplug power cord by grasping the plug
(NOT the cord) and disconnect from outlet.
3. Loop power cord around cord wraps on side
of the cylinder.
Transporting cleaner
1. To move your vacuum cleaner from room to room,
put the handle in the upright position, tilt the cleaner
back on its rear wheels and push forward.
2. The cleaner can also be moved by using the
carrying handle on the detachable cylinder.
to maintain maximum cleaning performance, the
following maintenance steps must be performed:
1. Empty the dirt container when the dirt
reaches the “Full” line on the side.
2. Check the upper tank and pre-motor filters at least
once a month and clean and replace as needed.
3. Replace the HEPA media post-motor filter
every six months.
notE: More frequent filter cleaning may be
necessary if you are vacuuming new carpet,
fine dust, or have allergy concerns.
follow the instructions on the following pages to
perform these simple maintenance steps.
Empty dirt container
the Dirt container needs to be emptied when the dirt
reaches the “full” line on the side of the container.
1. Unplug cleaner from electrical outlet.
2. Slide the Lock ‘n Seal lever to the “Unlock” position.
3. Grasp handle and pull the dirt container
straight out to remove from vacuum.
4. Empty dirt into garbage container.
5. Put the dirt container back in the vacuum
and slide the lever to the “Lock” position.
notE: the dirt container may be washed in
warm water with a mild detergent. Make
sure it is completely dry before replacing.
O
peration
WaRnInG:
to
reduce the risk of electric
shock, turn power switch
off and disconnect plug from
electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
For maximum
cleaning performance,
check and clean or
replace all filters
as suggested.
Full Line
Lock
Position
Unlock
Position
Carrying
Handle
M
aintenance and care