Brother HL-5240 - Manual (Page 103)

7. Troubleshooting
95
Wrinkles or creases
„ Make sure that the paper is loaded properly. See Printing on plain paper, bond
paper or transparencies from Tray 1, 2 or 3 on page 9.
„ Check the paper type and quality. See About paper on page 5.
„ Turn over the stack of paper in the tray or try rotating the paper 180 ° in the input
tray.
Wrinkles or creases
a
Open the back cover.
b
Press against the “1” on the blue levers on either side of the printer as shown
below.
c
As the top of the lever rotates backward, lift the bottom portion of the lever from
below until it stops.
d
Close the back cover and resend the print job.
Note
When you have finished printing, open the back cover and reset the two blue
levers back to their original position.
Examples of poor print
quality Recommendation
B DEFGH
abc efghijk
A C D
b c d e
1 3 4
ABCDEFG
EFGHIJKLMN