BenQ DV3750 - Manual (Page 22)

On-Screen Display (OSD) Menu 16
Eng
lish
PIP/PBP Functions are available with 480P, 576P, 720P and 1080i signal formats.
PC Menu
Options in this menu are available only if you have connected PC or DVI signals to the display.
Graphics
Input
Select graphics signal
input source for PIP/
PBP function.
Use the and buttons
on the remote control or
the V
VOL and V VOL
buttons on the display to
change selection.
• PC
• Component 1
• Component 2
• DVI
Reset All
Settings
Restore all settings to
default values.
Press the O OK button on the
remote control or the
INPUT button on the
display to reset.
1. Press the M MENU button on the remote control or
the M MENU button on the display to bring up the
main menu.
2. Press the or buttons to select P PC and then
press O OK to enter the submenu.
3. Press the or buttons to select an item.
4. In the P PC Menu, use the or buttons to adjust
the setting or select the options.
5. To return to the menu one level up, press the
EXIT button on the remote control, or the
MENU button on the display.
Item Function Operation Range
DPMS
Protect screen and enter
power saver mode when no
PC signal is detected.
Use the and buttons on the
remote control or the V VOL and
VOL buttons on the display to
change selection.
• Off
• On
Frequency
Adjust display clock fre-
quency.
Use the and buttons on the
remote control or the V VOL and
VOL buttons on the display to
change selection.
-32 to 32
Phase
Adjust display clock phase.
When receiving
Component video signal
in 480P, 576P, 720P or
1080i format, you can use
this function to enhance
the sharpness of the
picture.
Use the and buttons on the
remote control or the V VOL and
VOL buttons on the display to
change selection.
0 to 31
H. Position
Adjust horizontal position of
the image.
Use the and buttons on the
remote control or the V VOL and
VOL buttons on the display to
change selection.
-30 to 30
V. Position
Adjust vertical position of the
image.
Use the and buttons on the
remote control or the V VOL and
VOL buttons on the display to
change selection.
-30 to 30
Auto
Automatically adjusts fre-
quency, phase, H. position
and V. position to place the
image on the screen. Use the O OK button on the remote
control or the IINPUT button on
the display to begin auto adjust-
ment.