Philips Microcadena DVD por componentes - Manual (Page 24)

25
Program radio stations
manually
Note
You can program a maximum of 20 preset •
radio stations.
1
Tune to a radio station.
2
Press ANGLE/PROG to activate
programming.
3
Press / to allocate a number from
1 to 20 to this radio station, then press
ANGLE/PROG to confi rm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store •
another station in its place.
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1
Tune to a RDS radio station that
transmits time signals.
The unit reads the RDS time and sets
»
the clock automatically.
7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press TUNER.
3
Press and hold / .
4
When the frequency indication starts to
change, release the button.
The FM tuner tunes to a station with
»
strong reception automatically.
5
Repeat steps 3-4 to tune to more
stations.
To tune to a weak station:
Press
/ repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset •
radio stations.
1
Press / to select a preset number to
start programing.
2
Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO] (auto) is displayed briefl y.
All available stations are programmed
»
in the order of waveband reception
strength.
The fi rst programed radio station is
»
broadcast automatically.
English
EN