beautypg.com

3 connect, Connect fm antenna, Place the unit 1 – Philips Microcadena DVD por componentes User Manual

Page 11: Connect speakers

background image

12

2

Insert the stripped part of the wire

completely.

Insert the right speaker wires to “

R”,

left speaker wires to “ L”.
Insert the red wires to “

+”, black

wires to “ -”.

3

Release the socket fl ap.

Connect FM antenna

Tip

For optimal reception, fully extend and adjust

the position of the antenna.
For better FM stereo reception, connect an

outdoor FM antenna to the FM AERIAL jack.
The unit does not support MW radio

reception.

1

Connect the supplied FM wire antenna to

the FM AERIAL socket on the unit.

a

b

c

3 Connect

Place the unit

1

Place the unit near to the TV.

2

Place the left and right speakers at equal

distance from the TV and at an angle
of approximately 45 degrees from the
listening position.

Note

To avoid magnetic interference or unwanted

noise, never place this apparatus and speakers
too close to any radiation devices.
Never place this unit in an enclosed cabinet.

Install this unit near the AC outlet where the

AC power plug can be easily reached.

Connect speakers

Note

Ensure that the colors of the speaker wires and

terminals are matched.
For optimal sound, use the supplied speakers

only.
Connect only speakers with impedance that is

the same or higher than the supplied speakers.
Refer to the Specifi cations section of this
manual.

1

Hold down the socket fl ap.

EN

This manual is related to the following products: