Bushnell Onix 364000 - Manual (Page 21)

21
options for the Map Area (Fig. 36):
Stay Within-when this is checked, a “Map Area Breached!” warning
will flash onscreen if you leave the Map Area boundary.
Avoid Area-check this to generate the “Map Area Breached!”
warning if you enter the Map Area (for example, to prevent
accidentally trespassing on private property).
Navigate To-go towards the closest point in the area relative to your
current position
Visible On Map-turns viewing of the Map Area on/off
De-activate Alert-cancels the warning message that was automatically
set when you checked “Stay Within” or “Avoid Area”
Edit Name-change the name of the Map Area
Edit Map Area-select and press OK to access the Fence Post list for that
Map Area (to move, delete, rename, etc an individual Post) (Fig. 37)
Delete-delete the entire Map Area
Using the HOT Button
The HOT Menu
When you are on the MAP or NAV page, all basic navigation actions are
easily controlled by Bushnell’s exclusive “HOT button”. The HOT button is
also used to select the view options for the current display Page. Let’s take a
look-from the MAP page, click the HOT button to view the “HOT Menu”, then
use the DOWN or UP keys to select (highlight) an option (Fig. 38):
• Where Am I?: Press OK to see your current location on the map display.
This function lines up the GPS position icon (small black circle) with the
crosshair pointer icon.
• Find / Go To: Click OK or the RIGHT key to find or go to any of the listed
items (note that you can only select from previously stored items, not
create a new one, when using the Find/GoTo feature). After selecting your
destination and pressing OK, the title of the destination will show in a
yellow box at the top of the screen, and the bearing arrow will point in the
correct direction to take you to it. To stop this navigation activity, press
the HOT button again-you will see the option to stop. Press OK to confirm
you want to stop navigating, and you will be returned back to the MAP
page screen, but without the bearing arrow pointing the way to a specific
destination. The bearing arrow effectively becomes a “heading arrow”
once you stop navigating.
The available Find/GoTo items you can choose for navigation or viewing
are (Fig. 39):
1) Nearest Waypoints-a short list of close by waypoints
using your oniX400 gPs receiVer : the hot button menu
Fig 37. Editing a Map
Area by Moving a
Fence Post
Fig 38. HOT
Button Menu
Fig 39. Find/GoTo
Sub-Menu