Brother DCP 8060 - Manual (Page 40)

Chapter 5
28
Enlarging or reducing the
image copied
5
You can select the following enlargement or
reduction ratios:
Custom(25–400%)
allows you to enter a
ratio from 25% to 400%.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
To enlarge or reduce the next copy follow the
steps below:
a
Load your document.
b
Use the dial pad to enter the number of
copies (up to 99).
c
Press Enlarge/Reduce.
d
Press Enlarge/Reduce or c.
e
Choose one of the options below:
„ Press a or b to select the
enlargement or reduction ratio you
want. Press OK.
„ Press a or b to select Custom (25–
400%)
. Press OK. Use the dial pad
to enter an enlargement or reduction
ratio from 25% to 400%. (For
example, press 5 3 to enter 53%.)
Press OK.
f
Press Start.
Note
• The Auto setting is available only when
loading from the ADF.
• Page Layout Options 2 in 1(P), 2 in 1(L), 4
in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
(P) means Portrait and (L) means
Landscape.
Press
Enlarge/Reduce
100%
*
104% EXE iLTR
141% A5 iA4
200%
Auto
Custom(25–400%)
50%
70% A4 iA5
78% LGL iLTR
83% LGL iA4
85% LTR iEXE
91% Full Page
94% A4 iLTR
97% LTR iA4